AVALIAÇÃO DO TEOR DE UMIDADE DA MADEIRA DE Eucalyptus grandis POR MEDIDORES ELÉTRICOS RESISTIVOS

Authors

  • Fred Willians Calonego Universidade Estadual Paulista. Departamento de Recursos Naturais
  • Wagner Roberto Batista Universidade Estadual Paulista. Departamento de Engenharia Rural
  • Elias Taylor Durgante Severo Universidade Estadual Paulista. Departamento de Recursos Naturais
  • João Eduardo Guarnetti dos Santos Universidade Estadual Paulista. Departamento de Engenharia Mecânica. Faculdade de Engenharia de Bauru
  • Clovis Ribas Instituto Florestal

DOI:

https://doi.org/10.24278/2178-5031.200618325

Keywords:

drying wood, moisture meters, moisture content, Eucalyptus grandis

Abstract

The aim of the study was to evaluate the precision of two types of electric moisture meters during the drying process of Eucalyptus grandis boards. Samples were obtained from 14 boards of Eucalyptus grandis and they were dried in electric laboratory oven at 40 ºC of temperature, until the wood achieve 10% of moisture content. During the drying, the moisture content was determined by gravimetric method and simultaneous checks by an electric moisture meter (EMM) and by kiln control system (KCS). The results showed that: (1) the KCS can replace the gravimetric method during the wood drying; (2) the EMM underestimate the real moisture content during the drying of boards and it is not indicate as substitute of the gravimetric method.

Downloads

Download data is not yet available.

References

CECH, M. Y.; PFAFF, F. Kiln operator’s manual Eastern Canada. Ontario: Eastern Forest Products Laboratory, 1977. 189 p.

FOREST PRODUCTS LABORATORY. Wood handbook - wood as an engineering material. Washington, D.C.: United States Department of Agriculture, 1999. 463 p.

FORRER, J. B. An electronic system for monitoring gradients of drying wood. Forest Products Journal, Madison, v. 34, n. 7/8, p. 34-44, 1984.

GALINA, I. C. M. Variação da resistência elétrica em madeiras visando o grupamento de espécies. 1997. 93 f. Dissertação (Mestrado em Ciências/ Ciência e Tecnologia de Madeiras) - Escola Superior de Agronomia “Luiz de Queiroz”, Universidade de São Paulo, Piracicaba.

GALVÃO, A. P. M.; JANKOWSKY, I. P. Secagem racional da madeira. São Paulo: Nobel, 1988. 111 p.

HAYGREEN, J. G.; BOWYER, J. L. Forest products and wood science: an introduction. Iowa: Iowa State University Press: AMES, 1996. 484 p.

JAMES, W. L. Electric moisture meters for wood. Madison: United States Department of Agriculture - USDA, Forest Service, Forest Products Laboratory, 1988. 17 p. (USDA General Technical Report FPL-GTR, 6).

KOLLMANN, F. F. P.; CÔTE Jr., W. A. Principles of wood science and technology: I. solid wood. New York : Springer-Verlag, 1968. 592 p.

LIGNOMAT. Wireless probes revolutionize moisture measurement when drying wood. Disponível em: . Acesso em: 19 mar. 2005.

PONCE, R. H.; WATAI, L. T. Secagem da madeira. Brasília, D.F.: STI/IPT, 1985. 70 p. RASMUSSEM, E. F. Dry kiln operator’s manual. Madison: United States Department of Agriculture - USDA, 1961. 188 p.

SAMUELSSON, A. Calibration curves for resistance: type moisture meters. In: IUFRO INTERNATIONAL WOOD DRYING CONFERENCE, 3., Vienna, 1992. Proceedings… Vienna: IUFRO Wood Drying Working Party, 1992. p. 405-408.

SANTINI, E. J. Alternativas para o monitoramento e controle do processo de secagem de madeira serrada em estufa. 1996. 198 f. Tese (Doutorado em Engenharia Florestal/Setor de Ciências Agrárias) - Universidade Federal do Paraná, Curitiba.

SIMPSON, W. T. Dry kiln operator’s manual. Madison: United States Department of Agriculture - USDA, 1991. 274 p.

SKAAR, C. Wood-water relations. New York: Springer-Verlag, 1988. 283 p

Published

2006-06-06

How to Cite

CALONEGO, F. W.; BATISTA, W. R.; SEVERO, E. T. D.; SANTOS, J. E. G. dos; RIBAS, C. AVALIAÇÃO DO TEOR DE UMIDADE DA MADEIRA DE Eucalyptus grandis POR MEDIDORES ELÉTRICOS RESISTIVOS. Journal of the Forest Institute , São Paulo, v. 18, p. 71–78, 2006. DOI: 10.24278/2178-5031.200618325. Disponível em: https://rif.emnuvens.com.br/revista/article/view/325. Acesso em: 21 sep. 2024.

Issue

Section

Scientific Articles