GENETIC PARAMETERS AND CORRELATIONS OF GROWTH AND WOOD PROPERTIES IN Peltophorum dubium
DOI:
https://doi.org/10.24278/rif.2025.37e962Palabras clave:
Madera comercial, Heredabilidad, Árbol tropical, Densidad de la madera, Propiedades de la maderaResumen
The forestry industry uses wood property to assess wood quality and determine the appropriate industrial applications of wood. Understanding the narrow-sense average heritability among progenies ( ) and genetic correlations ( between traits is essential to guide selection of the best progenies in tree improvement. In this study, growth and 16 wood traits at three different positions (pith (PI), middle (MI), and near to the bark (BA)) were measured in a 32-year-old Peltophorum dubium provenance and progeny test established in São Paulo State, Brazil. Traits diameter (DBH) and height (H), and wood traits volumetric retraction (βv), anisotropy index (βt/βr), basic (ρbas) and apparent (ρpab) wood density, compressive strength (fc0), modulus of rupture (MOR), modulus of elasticity (MOE), shear parallel grain (fv0), vessel element length (VEL), vessel diameter (VDI), vessel density (VDE), fiber length (FL), fiber wall thickness (FWT), ray height (RH), ray length (RL), and ray frequency (RF) were used to estimate the and between traits aiming to select the best families for increase growth and wood quality. Significant differences among progenies were detected for average positions of wood properties ρbas, ρap, and MOE, ρbas, ρap, fc0, and FL at PI, and VDI and FL at MI positions. The for these traits was moderate (0.417–0.452). The pairwise of these traits ranged from moderate to high positives, indicating that selection on any one trait will result in indirect positive genetic gains in the others. This selection strategy is expected to produce wood that is suitable for various uses in the construction and furniture industries.
Descargas
Citas
Associação Brasileira de Normas Técnicas - ABNT. 2022a. NBR 7190-1: Projeto de estruturas de madeira – Parte 1: Critérios de dimensionamento. Rio de Janeiro: ABNT.
Associação Brasileira de Normas Técnicas - ABNT. 2022b. NBR 7190-3: Projeto de estruturas de madeira – Parte 3: Métodos de ensaio para corpos de prova isentos de defeitos para madeiras de florestas nativas. Rio de Janeiro: ABNT.
Bassan D, Santos SC, Davide LMC, Trovato VW, Medeiros ES, Santos CC, Carvalho RP. 2022. Genetic diversity of Peltophorum dubium (Spreng.) Taub. progenies from the states of Minas Gerais and Mato Grosso do Sul, Brazil. Brazilian Journal of Biology 82: e260760.
Blackburn DP, Hamilton MG, Harwood CE, Innes TC, Potts BM, Williams D. 2011. Genetic variation in traits affecting sawn timber recovery in plantation-grown Eucalyptus nitens. Annals of Forest Science 68: 1187–1195.
Bouffier L, Raffin A, Rozenberg P, Meredieu C, Kremer A. 2009. What are the consequences of growth selection on wood density in the French maritime pine breeding programme? Tree Genetics & Genomes 5: 11-25.
Carvalho PER. 1994. Espécies Florestais Brasileiras: Recomendações Silviculturais, Potencialidades e Uso de Madeira. Brasília: EMBRAPA-CNPF.
Chen S, Weng Q, Li F, Li M, Zhou C, Gan S. 2018. Genetic parameters for growth and wood chemical properties in Eucalyptus urophylla × E. tereticornis hybrids. Annals of Forest Science 75: 16.
Chen ZQ, Karlsson B, Mörling T, Olsson L, Mellerowicz EJ, Wu HX, Lundqvist SO, Gil MRG. 2016. Genetic analysis of fiber dimensions and their correlation with stem diameter and solid-wood properties in Norway spruce. Tree Genetics and Genomes 12: 123.
Climent J, Alía R, Karkkainen K, Bastien C, Benito Garzon M, Boufer L, De Dato G, Delzon S, Dowkiw A, Elvira Recuenco M, Grivet D, González Martínez SC, Hayatgheibi H, Kujala S, Leplé JC, Martín Sanz RC, Miguel M, Monteverdi MC, Mutke S, Plomion C, Ramírez Valiente JA, Sanchez L, Solé Medina A, Soularue JP, Stefenrem A, Teani A, Westin J, Whittet R, Wu H, Zas R, Cavers S. 2024. Trade offs and trait integration in tree phenotypes: Consequences for the sustainable use of genetic resources. Current Forestry Reports 10: 196-222.Cruz CD, Regazzi AJ. 1997. Modelos biométricos aplicados ao melhoramento genético. Viçosa: UFV.
Eufrade Junior HJ, Ohto JM, Silva LL, Lara Palma HA, Ballarin AW. 2015. Potential of rubberwood (Hevea brasiliensis) for structural use after the period of latex extraction: a case study in Brazil. Journal of Wood Science 61: 384-390.
Fukatsu E, Hiraoka Y, Matsunaga K, Nakata R. 2015. Genetic relationship between wood properties and growth traits in Larix kaempferi obtained from a diallel mating test. Journal of Wood Science 61: 10-18.
Fundova I, Hallingbäck HR, Jansson G, Wu HX. 2020. Genetic improvement of sawn-board stiffness and strength in Scots Pine (Pinus sylvestris L.). Sensors 20: 1129.
Galão ATD, Freitas MLM, Barbosa JA, Tomazello-Filho M, Marcati CR, Lima IL, Ballarin AW, Longui EL. 2023. Wood properties of 32-year-old Peltophorum dubium wood from two seed provenances planted in Luiz Antônio - SP, Brazil. Scientia Forestalis 51: e4002.
Gaspar MJ, Alves A, Louzada JL, Morais J, Santos A, Fernandes C, Almeida MH, Rodrigues JC. 2011. Genetic variation of chemical and mechanical traits of maritime pine (Pinus pinaster Aiton). Correlations with wood density components. Annals of Forest Science 68: 255-265.
Hamilton MG, Raymond CA, Harwood CE, Potts BM. 2009. Genetic variation in Eucalyptus nitens pulpwood and wood shrinkage traits. Tree Genetics and Genomes 5: 307–316.
Hassegawa M, Savard M, Lenz PRN, Duchateau E, Gélinas N, Bousquet J, Achim A. 2019. White spruce wood quality for lumber products: priority traits and their enhancement through tree improvement. Forestry 93: 16-37.
Hong Z, Fries A, Wu HX. 2014. High negative genetic correlations between growth traits and wood properties suggest incorporating multiple traits selection including economic weights for the future Scots pine breeding programs. Annals of Forest Science 71: 463-472.
Huda AA, Koubaa A, Cloutier A, Hernández RE, Périnet P, Fortin Y. 2018. Phenotypic and genotypic correlations for wood properties of hybrid poplar clones of Southern Quebec. Forests 9: 140.
Hung TD, Brawner JT, Meder R, Lee DJ, Southerton S, Thinh HH, Dieters MJ. 2015. Estimates of genetic parameters for growth and wood properties in Eucalyptus pellita F. Muell. to support tree breeding in Vietnam. Annals of Forest Science 72: 205-217.
Hung TD, Brawner JT, Lee DJ, Meder R, Dieters MJ. 2016. Genetic variation in growth and wood-quality traits of Corymbia citriodora subsp. variegata across three sites in south-east Queensland, Australia, Southern Forests: a Journal of Forest Science 78: 225–239.
IAWA Committee – IAWA. 1989. IAWA list of microscopic features for hardwood identification. IAWA Bulletin 3: 219-332.
Kien ND, Bien TH. 2024. Genetic control of traits relevant to solid-wood use in Eucalyptus pellita. Journal of Tropical Forest Science 36: 424–433.
Kien ND, Jansson G, Harwood C, Almqvist C. 2010. Clonal variation and genotype by environment interactions in growth and wood density in Eucalyptus camaldulensis at three contrasting sites in Vietnam. Silvae Genetica 59: 17-28.
Lenz P, Auty D, Achim A, Beaulieu J, Mackay J. 2013. Genetic improvement of white spruce mechanical wood traits early screening by means of acoustic velocity. Forests 4: 575-594.
Li C, Weng Q, Chen J-B, Li M, Zhou C, Chen S, Zhou W, Guo D, Lu C, Chen JC, Xiang D, Gan S. 2017. Genetic parameters for growth and wood mechanical properties in Eucalyptus cloeziana F. Muell. New Forest 48: 33-49.
Lima IL, Ranzini M, Longui EL, Cambuim J, Moraes MLT, Freitas MLM, Garcia JN, Sebbenn AM. 2024. Evaluation of genetic parameters for growth traits and wood properties in clones of Hevea brasiliensis (Willd. Ex Adr. Juss.). Revista do Instituto Florestal 36: 1-12.
Longui EL, Lima IL, Paneque L, Machado JAR, Freitas MLM, Sebbenn AM. 2024. Genetic parameters and correlations in growth and wood density traits of Balfourodendron riedelianum based on provenance and progeny testing. Silvae Genetica 73: 70-78.
Masendra IN, Ishiguri F, Hidayati F, Nirsatmanto A, Sunarti SS, KartikaningtyAS D, Takashima Y, Takahashi Y, Ohshima J, Yokota S. 2023. Variations of growth and wood traits in standing trees of the third-generation Acacia mangium families in Indonesia. Silvae Genetica 72: 150-161.
Mori ES, Sebbenn AM, Tambarussi EV, Guries RP. 2013. Mating system in natural populations of Peltophorum dubium. Scientia Forestalis 41: 307-317.
Nabais C, Hansen JK, David-Schwartz R, Klisz M, López R, Rozenberg P. 2018. The effect of climate on wood density: What provenance trials tell us? Forest Ecology and Management 408: 148-156.
Poupon V, Gazan SA, Schueler S, Lstiburek M. 2023. Genotype x environment interaction and climate sensitivity in growth and wood density of European larch. Forest Ecology and Management 542: 121259.
Resende MDV. 2016. Software Selegen-REML/BLUP: a useful tool for plant breeding. Crop Breeding and Applied Biotechnology 16: 330-339.
Resende MDV, Duarte BJ. 2007. Precisão e controle da qualidade em experimentos de avaliação de cultivares. Pesquisa Agropecuária Tropical 37: 182-194.
Riva LC, Moraes MA, Cambuim J, Zulian DF, Sato LM, Calfeita FA, Panosso AR, Moraes MLT. 2020. Genetic control of wood quality of Myracrodruon urundeuva populations under anthropogenic disturbance. Crop Breeding and Applied Biotechnology 20: e320920411.
Santos PET, Geraldi IO, Garcia JN. 2004. Estimativas de parâmetros genéticos de propriedades físicas e mecânicas da madeira em Eucalyptus grandis. Scientia Forestalis 63: 54-64.
Sebbenn AM, Siqueira ACFN, Vencovsky R, Machado JAR. 1999. Interação genótipo x ambiente na conservação ex situ de Peltophorum dubium (Spreng) Taub. em duas regiões do Estado de São Paulo. Revista do Instituto Florestal 11: 65-78.
Senna SN, Freitas MLM, Zanatto ASZ, Morais E, Zanata M, Moraes MLT, Sebbenn AM. 2012. Variação e parâmetros genéticos em teste de progênies de polinização livre de Peltophorum dubium (Sprengel) Taubert em Luiz Antônio-SP. Scientia Forestalis 40: 45-352.
Solórzano-Naranjo S, Moya R, Chauhan S. 2012. Early genetic evaluation of morphology and some wood properties of Tectona grandis L. clones. Silvae Genetica 61: 58-65.
Soro A, Lenz P, Hassegawa M, Roussel JR, Bousquet J, Achim A. 2022. Genetic influence on components of wood density variation in white spruce. Forestry: An International Journal of Forest Research 95: 153-165.
Sotelo-Montes C, Hernandez RE, Beaulieu J, Weber JC. 2006. Genetic variation and correlations between growth and wood density of Calycophyllum spruceanum at an early age in the Peruvian Amazon. Silvae Genetica 55: 217-228.
Takahashi Y, Ishiguri F, Takashima Y, Hiraoka Y, Iki T, Miyashita H, Matsushiba M, Ohshima J, Yokota S. 2023. Inheritance of wood properties and their radial variations in full-sib families of 36-year-old Japanese larch (Larix kaempferi). Annals of Forest Science 80: 1.
Weng Q, He X, Li F, Li M, Yu X, Shi J, Gan S. 2014. Hybridizing ability and heterosis between Eucalyptus urophylla and E. tereticornis for growth and wood density over two environments. Silvae Genetica 63: 15-24.
Wu S, Xu J, Li G, Lu Z, Han C, Hu Y, Hu X. 2013. Genetic variation and genetic gain in growth traits, stem-branch characteristics and wood properties and their relationships to Eucalyptus urophylla clones. Silvae Genetica 62: 4-5.
Zhang H, Zhang S, Chen S, Xia D, Yang C, Zhao X. 2022. Genetic variation and superior provenances selection for wood properties of Larix olgensis at four trials. Journal of Forest Research 33: 1867-1879.
Descargas
Publicado
Cómo citar
Número
Sección
Licencia
Derechos de autor 2025 Revista del Instituto Forestal
Esta obra está bajo una licencia internacional Creative Commons Atribución 4.0.
